Am I Overpaying My 3PL? How to Check in One Afternoon

By Published October 27, 2026 In Fulfillment & Logistics Costs

If you are asking “am I overpaying my 3PL,” the rate card will not tell you. The invoice will. Divide your last three monthly invoices by the orders you shipped in those months and you get your real cost per order. Then compare that number to what the 3PL’s proposal implied when you signed. If the gap is more than a few percent and your order profile has not changed, you are paying for something you did not plan on: accessorials, minimums, storage on dead inventory, or a rate card that has drifted faster than the market it is supposed to track.

That check takes one afternoon and three invoices, your order history and a spreadsheet. The rest of this article walks you through it, shows you how to tell whether the market or your own inventory is driving the increase, and tells you what to do when the answer is yes.

What “overpaying” actually means

Most brands compare rates. A pick fee of $0.45 versus $0.55 feels like a clear answer. It is not. A 3PL that charges less per pick and more per order, per carton, per return and per pallet-month can be the expensive one.

The only number that matters is fully loaded cost per order: everything on the invoice, including minimums, surcharges and project fees, divided by orders shipped. If you ship B2B and D2C through the same building, split it into two numbers, because a 400-unit replenishment order and a one-unit D2C order should never share an average.

Overpaying means one of three things: your cost per order is higher than the proposal implied, your rates have risen faster than the 3PL’s own costs, or the quote was priced against an order profile that is not yours. Each has a different fix, which is why the diagnosis comes first.

Step 1: Rebuild your cost per order from three invoices

Pull the last three monthly invoices and your shipped-order counts for the same months. Then work through this list.

  1. Bucket every line item. Storage, receiving, pick and pack, packaging, outbound freight (if billed through the 3PL), returns, accessorials and everything else. “Everything else” is where the surprises live: account management fees, WMS user fees, minimum shortfalls, project labor, cycle counts and kitting.
  2. Divide each bucket by orders shipped. The total is your fully loaded cost per order.
  3. Go back to the proposal. Every serious 3PL proposal models a monthly bill off your volume assumptions. Compute the cost per order it implied. If the proposal only listed unit rates, build the model yourself with the volumes you gave them.
  4. Compare the totals and the mix. A gap in the total tells you that you are overpaying. The bucket that explains the gap tells you why.

A worked example with made-up round numbers. Say a 20,000-order month and a $94,000 invoice. Pick and pack and packaging come to $52,000, storage $14,000, receiving $6,000, and accessorials and other charges $22,000. That is $4.70 per order. The proposal, run at the same volume, implied $4.05. The $0.65 gap is almost entirely the $22,000 “other” bucket, which the proposal assumed would be about $9,000. That is the conversation to have with the 3PL, and it is a very different one from “your pick fee is too high.” If you need a refresher on what each fee line covers, read 3PL fees explained before you start bucketing.

Step 2: Check whether your rates have moved faster than the market

A 3PL’s costs are mostly labor, rent and the carriers it buys from. Each has a public reference point you can check in a few minutes.

Labor. Average hourly earnings for all employees in warehousing and storage (NAICS 493) were $26.74 in August 2026, according to the Bureau of Labor Statistics industry page for warehousing and storage. Pull the same series for the month you signed and you have the wage inflation your 3PL actually faced. If your handling rates went up 10% and the wage series went up 4%, the difference is margin, not cost recovery.

Rent. CBRE’s Q3 2026 U.S. industrial and logistics figures put the national average net asking rent at $11.16 per square foot, up 3.6% year over year, with vacancy at 6.4%. Storage fees tied to a lease signed years ago should not be climbing in double digits when market rent is rising at a third of that pace.

Carriers. If your 3PL resells parcel, the published increases are the ceiling for a pass-through. UPS has announced that its 2027 Daily Rates for Ground, Air and International services will increase an average net 5.9% effective December 21, 2026, per the UPS shipping costs and rates page. On surcharges, FedEx’s 2026 changes raised the Residential Delivery Charge for FedEx Ground and Home Delivery from $5.95 to $6.45 per package effective January 5, 2026, per the FedEx 2026 surcharge and fee changes. That is an 8.4% jump on a line that hits every D2C package. If your 3PL’s parcel line rose 15% and your zone and weight profile did not change, ask to see the carrier’s notice next to the 3PL’s.

None of these figures tell you what a fair rate is. They tell you what a fair increase is, which is usually the more useful question. Most 3PL relationships are not overpriced on day one. They drift.

Step 3: Find the fees you are causing

Many accessorials on a 3PL invoice are triggered by the brand, not the warehouse. Before you accuse anyone of gouging, find out which of these you own.

Fee line Usually caused by Fix on your side
Non-compliant inbound receiving Missing ASNs, mixed-SKU cartons, no labels, floor-loaded containers without notice Enforce a vendor routing guide and send ASNs before the truck arrives
Long-term storage and slow-mover charges SKUs that have not turned in 90 or more days Mark down, liquidate or return to vendor; stop replenishing the long tail
Minimum monthly shortfalls Volume below the floor you agreed to Renegotiate the floor to a trailing-90-day average with a reset clause
Returns processing High return rates, no disposition rules Give the 3PL a written disposition matrix so each return is touched once
Rush and same-day fees Marketing drops without notice Share the promo calendar 30 days out

Run this table against your “other” bucket from Step 1. Whatever sits on the brand’s side of the dock is the fastest to eliminate, because you do not need the 3PL’s permission to stop causing it.

Five signs you are overpaying

  • Your cost per order rose while order volume rose. Fulfillment has fixed costs. More orders should pull the per-order number down, not up.
  • Accessorials are a growing share of the invoice month over month. A stable operation produces a stable mix. A rising “other” line means your behavior changed or the 3PL found new things to bill.
  • You are paying storage on inventory you could not sell at any price. That is not a 3PL cost. It is an inventory decision you keep deferring, billed monthly.
  • Rate increases arrive as a percentage with no cost reference. A 3PL that can tie an increase to a wage series, a lease renewal or a carrier notice has nothing to hide. One that cannot is pricing on what you will tolerate.
  • Nobody at the 3PL can explain the invoice line by line. If the account manager has to “check with billing” on more than one line, nobody is managing it on their side either.

When the rate is fine and the problem is the fit

Some brands check all of the above, find the rates reasonable and the fees theirs, and still pay too much. That usually means the 3PL was priced for an order profile that is not yours. A building set up for single-unit D2C orders will struggle with six-line wholesale orders, and a pallet-in, pallet-out distributor will charge dearly for each-picking a 3,000-SKU catalog. Neither is overcharging. You are paying for work their process was not designed to do.

The tell is unit economics that do not improve with scale. If you doubled volume and cost per order barely moved, that is a selection problem, not a pricing problem, and renegotiating the rate card will not fix it.

What to do when the answer is yes

  1. Fix your side first. Clear the slow movers, send ASNs, tighten order release, share the promo calendar. Give it 60 days and re-run the three-invoice check so you negotiate from a cleaner invoice.
  2. Bring data, not a complaint. Put your cost per order, the proposal’s implied cost per order, the gap by bucket and the public cost references on one page. Ask the 3PL to walk you through the difference.
  3. Renegotiate the structure, not just the rates. Minimums tied to a trailing average, storage billed on actual cube, accessorials with a published list and a cap, and an annual increase tied to a named index are worth more than a few cents off the pick fee.
  4. Benchmark before you threaten to leave. Know whether the market would price your profile lower before you spend the credibility. A fulfillment cost benchmarking engagement does exactly that, at a fraction of the cost and disruption of a full RFP.
  5. Switch only when the fit is wrong. A move costs you a transition and a quarter of degraded service. It is worth it when the 3PL cannot serve your profile, rarely over rates alone. Reread the 3PL contract red flags before you sign the next one.

Frequently asked questions

How much should 3PL rates go up each year?

An increase should track the 3PL’s actual cost drivers: the BLS wage series for warehousing and storage, industrial rent reports from firms like CBRE, and the carriers’ published general rate increases. An increase well above those references with no explanation is a negotiation, not a notice.

Is a lower pick fee a sign of a cheaper 3PL?

No. Pick fees are one line of a dozen. Compare fully loaded cost per order at your real volume and order profile, including minimums, accessorials and storage, before you conclude anything from a unit rate.

Should I run an RFP if I think I am overpaying?

Not as a first step. Rebuild your cost per order, fix the fees you are causing, and renegotiate with data. An RFP is the right tool when the 3PL cannot serve your order profile or will not engage on structure, not when a few invoice lines are out of line.

If you have done the three-invoice check and the gap is real, the next step is to find out what the market would charge for your profile and take that number into the room with your 3PL. The fulfillment cost analysis is built to answer exactly that question.

Also worth reading: 3PL Performance Metrics: A Scorecard You Can Verify

Michael Nooner

Verify on LinkedIn →

Michael Nooner, The 3PL Cowboy, is a supply chain operator and advisor with 17+ years running warehouse and fulfillment operations for brands including Nike, Walmart, DHL, FedEx, Kellogg's and Peloton. He has launched 60+ facilities and advises brands and 3PL operators on partner selection, fulfillment costs and network strategy.

How this article was produced: drafted with AI-assisted research and writing tools under editorial guidelines set by Michael Nooner, and published under his byline. Operating figures and recommendations draw on his 17+ years running warehouse and fulfillment operations. Spotted an error? Use the contact page and it will be corrected. Editorial standards

Talk to the 3PL Cowboy before your next warehouse or 3PL decision.

One conversation now can save months of the wrong contract later.