3PL Fees Explained: Storage, Pick and Pack, Receiving

By Published October 21, 2026 In Fulfillment & Logistics Costs

3PL fees break into four buckets: storage (space, billed per pallet, bin or cubic foot per month), pick and pack (labor to get product into a box, billed per order and per additional unit), receiving (unloading, counting and putting away inbound freight, billed per pallet, per carton or per hour) and accessorials (everything else — kitting, returns, labeling, projects, minimums and the long tail at the back of the rate card). Shipping is a fifth bucket that usually rides through the 3PL at a markup. The rate card tells you the price of each line. It does not tell you what you will pay, because your bill is those rates multiplied by your order profile: units per order, cartons per receipt, pallet turns and how often your product trips a surcharge. Here is how each bucket is priced, where the money hides and how to read a rate card against your own orders.

Storage fees: what you pay for space

A 3PL charges storage because it carries the lease, and leases keep getting more expensive. Cushman & Wakefield’s Q3 2026 U.S. industrial report puts national vacancy at 6.8 percent and annual asking rent growth at 4 percent (Cushman & Wakefield, Q3 2026). That cost flows through to you monthly.

Pallet storage is the simplest to audit. Bin and cubic-foot storage need a closer read, because the 3PL decides how your SKU is slotted and therefore how many locations you are billed for. Three things to pin down:

  • Billing basis. Peak location count in the month, average daily count, or a snapshot on the first? Peak billing can charge you a full month for a pallet that sat four days.
  • Pallet definition. Usually a 48×40 footprint at a stated maximum height. An overheight pallet bills as two. Compare that height to how your supplier builds pallets.
  • Aged-inventory surcharges. Many 3PLs add a charge on inventory older than 180 or 365 days. If you carry slow movers, this line will show up.

Pick and pack fees: what you pay per order

Pick and pack is where most of a direct-to-consumer brand’s fulfillment spend lives, and where fee structures vary most. The usual pattern is a per-order fee covering the first unit plus a smaller fee for each additional unit. Some 3PLs quote a flat per-unit fee; some quote per line (per SKU on the order). Each structure favors a different order profile, so two similar-looking quotes can land far apart once you run your own orders through them.

Behind the fee is labor. The Bureau of Labor Statistics reports average hourly earnings of $26.74 for all employees in warehousing and storage (NAICS 493) as of August 2026, on a 40.7-hour average workweek (BLS, Warehousing and Storage, August 2026 preliminary). Load that with taxes, benefits, turnover and supervision and the person touching your order costs the 3PL well north of $35 an hour. A pick fee is that cost divided by how many orders a picker completes in an hour in that building with a product like yours. When a quote comes in low, the question is whether the building, slotting and systems actually support that productivity, or whether the fee climbs at the first renewal.

Usually included: the pick, the pack, a standard box or mailer, the label and basic void fill. Often extra: branded inserts, gift messages, custom boxes, fragile wrap, hazmat handling, multi-box orders and the packaging materials themselves. Ask for the fee priced by order composition — one unit, three units, three lines, a wholesale carton — before you sign.

Receiving fees: what you pay to get product in the door

Receiving is the bucket brands forget until the first invoice. It covers unloading, counting, inspecting, labeling and put-away, billed per pallet, per carton, per unit or per hour. Where the cost hides:

  • Floor-loaded containers. A 40-foot container of loose cartons takes hours to unload and palletize. Expect a separate, higher rate versus palletized receipts. If your overseas supplier floor-loads, this line matters more than your pick fee.
  • Non-compliant inbound. No ASN, no carton labels, mixed SKUs in a carton or counts that miss the packing list all trigger exception handling, usually hourly.
  • Dock-to-stock time. Not a fee, but a cost. If receipts take five days to become available inventory, you pay storage on product you cannot sell. Put a dock-to-stock standard in the contract; 3PL SLA examples shows how to word it.

Accessorial fees: the long tail

Accessorials are every line that is not storage, pick and pack, receiving or freight. They are legitimate charges for real work; the problem is that brands do not model them. A typical rate card carries 20 to 40. The ones that move the needle:

  • Monthly minimum. If activity falls short of a stated dollar amount, you pay the minimum anyway. Check it against your slowest month first.
  • Returns processing. Per return plus per unit, often with a separate inspection or re-bag fee before product goes back to stock.
  • Special projects. The catch-all hourly line. Fair at a stated rate with a work order you approve in advance; not fair as an open line on the invoice.
  • Onboarding and offboarding. Setup fees at the start, transition and final-inventory fees at the end. The exit fee is what keeps brands stuck at a 3PL they want to leave.

Shipping: the biggest number on the invoice

Parcel is often larger than every other bucket combined, and the carrier publishes exactly what the 3PL pays before discount. FedEx’s 2026 surcharge schedule, effective January 5, 2026, lists a residential delivery charge of $6.45 per package, a dimension-based additional handling surcharge starting at $29.50, a residential delivery area surcharge of $6.60 and an address correction fee of $25.50 (FedEx 2026 Surcharge and Fee Changes). UPS updated its Rate and Service Guides effective September 7, 2026 and has published peak-season demand surcharges (UPS shipping costs and rates). Those are list figures; a 3PL with volume earns discounts, then passes shipping to you at some markup.

Ask three questions. Is shipping billed at cost plus a stated markup, at a rate table the 3PL built, or at a blended all-in rate per package? Which surcharges pass through at list and which are discounted — residential, delivery area and additional handling are the three to check. And who chooses the box? Dimensional weight is set by carton size, so the 3PL’s packing decisions are your shipping cost; cartonization strategy covers that.

How to read a 3PL rate card against your own orders

A quote is not a price; it is a formula. The only way to compare 3PL fees is to run your actual activity through each rate card.

  1. Pull 90 days of history: orders, units, lines, cartons shipped, residential share, dims and weight by SKU, inbound receipts by pallet and carton, returns.
  2. Build one worksheet per 3PL with identical rows: storage, receiving, pick and pack, packaging, kitting, returns, minimums, account fees, shipping.
  3. Price each row in the 3PL’s unit of measure, not yours. If they bill per bin, estimate bins from SKU count and cube.
  4. Add the accessorials you know you will trip: floor-loaded receiving, subscription kits, retail labels.
  5. Divide by orders to get a fully loaded cost per order, with and without shipping.
  6. Stress-test it: your slowest month against the minimum, your peak month against any surge or overflow language.
Fee bucket Common unit What drives your cost Confirm before signing
Storage Pallet, bin or cubic foot per month SKU count, inventory depth, pallet height Billing basis, pallet definition, aged-inventory surcharge
Receiving Per pallet, carton or hour Palletized vs. floor-loaded, ASN and label compliance Floor-load rate, dock-to-stock standard, exception rate
Pick and pack Per order plus per unit, per unit, or per line Units and lines per order, packaging requirements Fee by order composition, included packaging, materials markup
Accessorials Per kit, return, label or hour Kitting, returns rate, retail compliance, projects Monthly minimum, project approval, exit fees
Shipping Per package Dims, weight, zone, residential share, carton choice Markup method, surcharge pass-through, who picks the box

Why the invoice never matches the quote

Three reasons, in the order I see them. First, the order profile the 3PL priced was not yours: they assumed 1.4 units per order and you ship 3.2, or they assumed palletized inbound and you floor-load. Second, accessorials were never modeled, so minimums, project hours and returns land as new money. Third, input costs moved. The producer price index for general warehousing and storage, the BLS measure of what warehouses charge for their services, was up more than 3 percent year over year as of August 2026 (BLS PPI, General Warehousing and Storage, via FRED). Most contracts carry an annual escalator and a right to reprice on labor or rent; read both clauses and know when they kick in.

The fix for all three is the same: audit invoices monthly against the contract, line by line, and reconcile unit counts against your own order and receipt data. Brands that do not look pay the variance for the life of the contract. To know whether your rates themselves are in line, fulfillment cost benchmarking compares them against what comparable brands pay. And if you are still choosing, the questions to ask a 3PL before signing put the fee questions in the context of the full negotiation.

Frequently asked questions

What is a typical 3PL fee structure?

Monthly storage by pallet, bin or cubic foot; receiving by pallet, carton or hour; pick and pack by order plus per additional unit; accessorials by unit or hour; and shipping passed through at a markup. The structure matters more than any single rate because your order profile decides which one costs less.

Is a per-unit or per-order pick fee better?

A per-order fee with a small per-unit add-on favors multi-unit orders; a flat per-unit fee favors single-unit orders. Run your own order mix through both before deciding.

Which accessorial fees should I watch most closely?

Monthly minimums, floor-loaded receiving, returns processing, special project hours and exit or transition fees. Those five explain most of the gap between quote and invoice.

Can I negotiate 3PL fees after signing?

Usually at renewal, and sometimes mid-term if volume has grown past the tier you were quoted on. Bring invoice history and your actual order profile; a 3PL reprices on data, not on a request.

If you want a second set of eyes on a rate card, a quote or a stack of invoices, start with a fulfillment cost analysis. It takes your real order data, prices it against the contract and tells you plainly where the money is going and what to fix.

Also worth reading: 3PL Performance Metrics: A Scorecard You Can Verify

Michael Nooner

Verify on LinkedIn →

Michael Nooner, The 3PL Cowboy, is a supply chain operator and advisor with 17+ years running warehouse and fulfillment operations for brands including Nike, Walmart, DHL, FedEx, Kellogg's and Peloton. He has launched 60+ facilities and advises brands and 3PL operators on partner selection, fulfillment costs and network strategy.

How this article was produced: drafted with AI-assisted research and writing tools under editorial guidelines set by Michael Nooner, and published under his byline. Operating figures and recommendations draw on his 17+ years running warehouse and fulfillment operations. Spotted an error? Use the contact page and it will be corrected. Editorial standards

Talk to the 3PL Cowboy before your next warehouse or 3PL decision.

One conversation now can save months of the wrong contract later.