Dallas-Fort Worth Warehouse Market: What Brands Pay

By Published November 5, 2026 In Network Design & Real Estate

Dallas-Fort Worth industrial space is getting more expensive and harder to find. Cushman & Wakefield’s Q3 2026 MarketBeat puts the average asking rent at $9.76 per square foot per year, net, up 19.9% from a year earlier. Warehouse and distribution space averages $9.55. Vacancy is 7.3%, its lowest level since Q3 2023. CBRE’s Q3 2026 figures put vacancy at 7.8%, down from 8.9% a year ago. If you are a brand weighing the Dallas-Fort Worth warehouse market, the short version is this: the deep discounts from 2024 are gone, the big-box buildings are filling, and the best deals left are in mid-size space and in submarkets the national 3PLs aren’t crowding into. Look south along I-20 and I-45, at Alliance in north Fort Worth, and along the I-35 corridor toward Denton. Then decide whether you need a lease at all, or a 3PL contract that turns those rents into a per-pallet and per-order price.

What the numbers say right now

Cushman & Wakefield and CBRE measure the market differently, so their figures don’t match exactly. They agree on the direction, though. Here is the Q3 2026 picture, with each figure next to its source.

Measure Q3 2026 Source
Overall vacancy 7.3% (down 150 bps year over year) Cushman & Wakefield
Overall vacancy 7.8% (8.9% in Q3 2025) CBRE
Average asking rent, all industrial $9.76 per sq ft per year, net Cushman & Wakefield
Average asking rent, warehouse/distribution $9.55 per sq ft per year (up 20.1% year over year) Cushman & Wakefield
Net absorption in the quarter 13.9 million sq ft (C&W); 6.4 million sq ft (CBRE) C&W, CBRE
Leasing volume in the quarter 23.5 million sq ft CBRE
Under construction 30.6 million sq ft, about 3.0% of inventory (C&W); 33.91 million sq ft (CBRE) C&W, CBRE

For context, JLL’s mid-2026 market dynamics report (data as of June 30, 2026) had vacancy at 9.3%, its seventh straight quarterly decline from an 11.1% peak in Q3 2024, and average asking rent at $8.99. Different methods, same story: the glut from the recent building wave is being absorbed.

Two details matter more to a brand than the headline. First, CBRE says DFW leads the nation in industrial space under construction, so new supply keeps arriving. Second, Cushman & Wakefield reports that mid-size buildings of 150,000 to 499,999 square feet are the only size segment with double-digit vacancy, at 10.1%. That is the range most growing brands and regional 3PLs actually shop in.

What brands actually pay: rent versus a 3PL rate

Most brands never pay DFW rent directly. They pay a 3PL, and the 3PL pays the rent. So it helps to translate a per-square-foot rate into the units on your invoice.

Asking rents in these market reports are quoted net. Taxes, insurance and common-area costs (the “NNN” charges) sit on top, along with utilities, racking, equipment, labor, the WMS and the operator’s margin. When a 3PL quotes you storage per pallet per month, all of that is baked in.

Here is a worked example with round, illustrative numbers. It is a planning exercise, not a quote.

  1. Start with the warehouse/distribution asking rent: $9.55 per square foot per year, or about $0.80 per square foot per month.
  2. Assume each pallet position uses about 10 square feet of building once you spread the aisles, docks and staging across stacked rack positions. Your layout may be better or worse.
  3. Base rent per pallet position is then roughly $8 a month.
  4. Add the operating costs on top of base rent, plus racking, labor to put away and replenish, and the operator’s margin.

The point: a roughly 20% jump in base rent over a year flows straight into storage pricing at renewal. If your 3PL contract renews in 2027 and your storage rate hasn’t moved since 2024, expect a conversation. Our breakdown of 3PL fees walks through which line items move with rent and which move with labor.

Labor is the other half of the bill. Employment in transportation, warehousing and utilities across the Dallas-Fort Worth-Arlington metro stood at about 272,000 in August 2026, seasonally adjusted, according to BLS data published through FRED. A deep labor pool is one of DFW’s real advantages. It does not mean labor is cheap in every submarket. Big distribution clusters compete for the same pickers and forklift drivers.

Where to look: the submarkets that matter for brands

DFW is not one market. It is a dozen submarkets (our Dallas market page has the overview) with very different buildings, labor sheds and freight access. Cushman & Wakefield’s Q3 2026 report names Alliance (3.6 million square feet), Far North/I-35 (2.1 million) and South Dallas (1.8 million) as the quarter’s absorption leaders. Those are the places tenants are voting with their leases.

South Dallas and the I-20/I-45 corridor

Big modern distribution buildings, good highway access to I-20, I-35E and I-45, and Union Pacific intermodal service nearby. This is where much of the large-format e-commerce and retail distribution has gone. A strong choice for a brand that needs room to grow.

Alliance and north Fort Worth

Built around BNSF’s intermodal yard and the AllianceTexas development. Large, newer buildings, a deep 3PL presence, and good access to I-35W. Landlords there have less reason to bargain right now.

Great Southwest and Arlington

Central location between Dallas and Fort Worth, close to DFW Airport, with an older stock of smaller and mid-size buildings. Clear heights are often lower, which hurts pallet density, but rents can make up for it.

Far North/I-35 toward Denton, and East Dallas

Far North follows the population growth north. The I-20 and I-30 corridors east of Dallas offer newer product at the metro’s edge. Both can be good values if you don’t need to sit next to the airport or a rail yard.

Drive each finalist site at 6 a.m. and 3 p.m. on a weekday. Shift-change traffic and the parking lot next door tell you more about your labor problem than any market report.

Texas inventory taxes: ask before you sign

Texas taxes business personal property, including inventory, at the local level. Two exemptions can take a lot of that cost off the table for goods that don’t stay long. According to the Texas Comptroller:

  • Freeport exemption. Covers goods held in Texas for 175 days or less and then shipped out of state. Apply on Form 50-113.
  • Goods-in-transit exemption. Covers goods held in storage and then shipped to another location, in or out of Texas, within 175 days. Apply on Form 50-758.
  • The catch. Local taxing units can elect to tax these goods anyway, and each exemption has its own conditions, including rules about the storage location and petroleum products.

What that means for you: before you pick a DFW building or 3PL, ask the county appraisal district which exemptions apply at that specific address, and whether your inventory turns fast enough to qualify. A slow-moving SKU set can change the math. Have your tax advisor confirm it.

Lease or use a 3PL in DFW?

The current market shapes this choice more than it did two years ago.

Factor Lease your own building Use a DFW 3PL
Space needed Usually makes sense once you can fill a mid-size building and expect to grow into it Better under that, or when volume is uncertain
Commitment Multi-year lease, rising base rent, build-out and racking capital Contract terms you can negotiate shorter
Exposure to rent increases Locked in for the term, then reset at renewal Passed through at contract renewal or on a rate review
Labor You recruit, train and retain Operator’s problem, and shared across clients
Control Full control of layout, process and systems Shared space and the operator’s processes

With mid-size vacancy still in double digits, a brand that is ready to run its own building may find landlords more flexible on that size range than on big-box space. If you go that way, our guide to industrial lease negotiation covers the terms to push on, and our industrial real estate strategy work covers site selection and renewals.

A checklist before you commit to a DFW site

  1. Map your customers first. Pull 12 months of ship-to ZIP codes and check them against UPS and FedEx ground transit maps from each candidate ZIP. DFW’s central location is a strength, but it isn’t magic for every customer mix.
  2. Pick the submarket by freight and labor, not by rent alone. Rail-served, airport-adjacent and highway corridors each suit different businesses.
  3. Check clear height, dock count and trailer parking. An older building with lower clear height can cost you more in pallet positions than you save in rent.
  4. Ask about inventory tax exemptions at that address. Confirm with the appraisal district which taxing units honor the freeport and goods-in-transit exemptions.
  5. Test labor. Look at what nearby distribution centers are advertising for warehouse associates and forklift operators, and how many are hiring.
  6. Plan for renewal. With asking rents up roughly 20% in a year, model what your rate looks like at the next renewal, whether that is your lease or your 3PL contract.

Frequently asked questions

What is the industrial vacancy rate in Dallas-Fort Worth?

In Q3 2026, Cushman & Wakefield reported 7.3% and CBRE reported 7.8%. Both are down from a year earlier, and the difference comes from how each firm defines and measures its inventory.

How much does warehouse space cost in Dallas-Fort Worth?

Cushman & Wakefield put average warehouse and distribution asking rent at $9.55 per square foot per year, net, in Q3 2026. Operating costs and fit-out come on top.

Which DFW submarkets are most active?

Alliance, Far North/I-35 and South Dallas led net absorption in Q3 2026, according to Cushman & Wakefield.

Does Texas tax inventory stored in a warehouse?

Texas local taxing units can tax inventory as business personal property. The freeport and goods-in-transit exemptions can remove that tax for goods shipped onward within 175 days, but local units can opt out, so check the specific address.

Is it cheaper to lease space or use a 3PL in Dallas?

It depends on volume and how predictable it is. Below the size where you can fill and staff a building on your own, a 3PL usually costs less in total and carries less risk; above it, a lease can win if you can run the operation well.

DFW is still one of the best places in the country to put inventory, but the window for cheap space has closed and the right submarket depends on where your customers are and how your freight moves. If you are deciding whether DFW belongs in your network, or where in the metro to land, we can model it with your own order data through our distribution network design work.

Also worth reading: Supply Chain Conferences 2026: 10 U.S. Events Worth the Trip

Michael Nooner

Verify on LinkedIn →

Michael Nooner, The 3PL Cowboy, is a supply chain operator and advisor with 17+ years running warehouse and fulfillment operations for brands including Nike, Walmart, DHL, FedEx, Kellogg's and Peloton. He has launched 60+ facilities and advises brands and 3PL operators on partner selection, fulfillment costs and network strategy.

How this article was produced: drafted with AI-assisted research and writing tools under editorial guidelines set by Michael Nooner, and published under his byline. Operating figures and recommendations draw on his 17+ years running warehouse and fulfillment operations. Spotted an error? Use the contact page and it will be corrected. Editorial standards

Talk to the 3PL Cowboy before your next warehouse or 3PL decision.

One conversation now can save months of the wrong contract later.